Apply generously and evenly in circular motions prior to sun and environmental exposure. Wear alone all over for a subtle to buildable glow and full protection.
Or use as a highlighter by applying to high points of the face. In this case, ensure full SPF protection by using another Total Protection™ product applied all over first.
OPEN: Remove brush cap, pull back the sleeve, and remove and discard the rubber band. Put cap back on.
ACTIVATE: With the cap still on, hold the brush with cap facing down and tap 3-5 times on a hard surface. Put some power behind those taps! Then remove the cap and run your finger through the bristles to ensure powder is flowing. Repeat tapping if needed, until you see a small puff of powder in the air when running your finger through the bristles.
APPLY: Using small circular motions, sweep directly onto dry bare skin, moisturized skin, or over makeup. Apply generously across your face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application. If applying directly over a moisturizer, primer or liquid foundation, ensure products have fully set before applying Sunforgettable®. Reapply at least every two hours for continued protection.
Know better skin.
Tips to get the most out of your Brush-On Shield.
1. Apply as your last layer of protection in the morning (it works great over makeup!) and reapply at least every 2 hours throughout the day for continued protection.
2. Be sure to check that the cap on the bottom of your brush is screwed on tightly to prevent powder from spilling out. It may come loose with normal use.
3. Taking your brush to the beach? Apply and reapply to completely dry skin, as contact with water can cause the brush to clog.
All Products
